ELITE ELS SYSTEM
ELITE ELS SYSTEM is electronic lead screw project for bench lathes (which does not include fullsize leadscrew gearbox) designed and tested by ELITMAN LABS. This system alows you to cut any threads on small lathes by simply setup your thread pitch on display with ease. System provides much more then just thread cutting.
[ ELITMAN BOARD ]
REC- SYS.DIFFICULTY: ■■□□□ (2/5)
- BUILD.TIME: ~2 Hours
- CORE.MCU: ESP32-S3 (Shielded)
- PROCESSES: THT Soldering, Plug & Play
- TOOLS: Basic Iron, Screwdriver (gummy bears 🐻)
- LOG: PCB optimized for EMI. Instant USB-C flash. Ready for field deployment.
[ DIY ROUTE ]
HARD- SYS.DIFFICULTY: ■■■■■ (5/5)
- BUILD.TIME: 15+ Hours
- CORE.MCU: ESP32-S3 (Raw Module)
- PROCESSES: SMD Hot-Air, Custom PCB Routing, EMI Shielding
- TOOLS: Hot-Air, Oscilloscope, Logic Analyzer, Flux
- LOG: Severe EMI risk. Exposed jumper wires act as antennas. Heavy debugging expected.
SYS.BOM // BILL_OF_MATERIALS
| Component Name | Package / Spec | Value / Model | LCSC Code | Qty | Alternative |
|---|---|---|---|---|---|
| Core Controller | Dev Board | ESP32-S3 WROOM-1 | C2934560 | 1x | NodeMCU ESP32-S3 |
| – | 1x | ||||
| – | 1x | ||||
| – | 1x | ||||
| – | 1x | ||||
STEP [01]
SEM IDE HLAVNY NAZOV KONKRETNEHO POSTUPU
sem patrí detailný postup práce pri každom jednom kroku.